P2713Transmission
Pressure Control Solenoid D
P2713 means the transmission control module detected a general electrical or performance fault with pressure control solenoid D.
🚗 Not recommended for long. Pressure control faults cause harsh shifts and possible internal damage.
Is P2713 really the problem on YOUR car?Get a free AI diagnosis ranked by probability for your exact year, make, and model.
Run Free Diagnosis →
🎯 Top Causes, Ranked by Likelihood
#1Failed pressure control solenoid D$150-$500
The solenoid has failed electrically or mechanically.
#2Wiring or connector fault$100-$350
Open, shorted, or corroded wiring disrupts the circuit.
#3Low or degraded fluid$100-$300
Poor fluid impairs solenoid operation.
#4Valve body wear$500-$1500
Worn bores affect pressure control.
🩺 Common Symptoms
- Harsh or delayed shifts
- Slipping
- Check engine light
- Possible limp mode
- Poor fuel economy
💰 Repair Cost: DIY vs Shop
📋 Free OBD2 Code Cheat Sheet
The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.
🔧 How to Diagnose P2713
1Check fluid level and condition first
2Scan for related pressure control codes
3Test solenoid D resistance and wiring
4Service the valve body or solenoid pack as needed
❓ Frequently Asked Questions
Can I drive with P2713?
Only briefly. Pressure control faults can cause slipping and internal damage.
What does solenoid D control?
It regulates hydraulic line pressure for a specific circuit or apply element.
How much to fix P2713?
A solenoid replacement runs $400-$800; valve body work costs more.
🔗 Related Codes
Don't guess. Know exactly what's wrong.AmpAuto's AI ranks the real causes for your specific vehicle in 30 seconds.
Diagnose P2713 Free →