P2762Transmission
Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance
P2762 means the torque converter clutch pressure control solenoid control circuit is out of the expected range or performing erratically.
🚗 Not recommended for long. Erratic lockup control causes shudder and heat.
Is P2762 really the problem on YOUR car?Get a free AI diagnosis ranked by probability for your exact year, make, and model.
Run Free Diagnosis →
🎯 Top Causes, Ranked by Likelihood
#1Failing TCC solenoid$150-$500
The solenoid responds erratically or drifts.
#2High resistance in wiring$100-$350
Corroded connections cause out-of-range readings.
#3Low or degraded fluid$100-$300
Poor fluid impairs solenoid response.
#4Valve body wear$500-$1500
Worn bores affect lockup pressure.
🩺 Common Symptoms
- Shuddering during lockup
- Poor fuel economy
- Check engine light
- Inconsistent lockup
- Possible limp mode
💰 Repair Cost: DIY vs Shop
📋 Free OBD2 Code Cheat Sheet
The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.
🔧 How to Diagnose P2762
1Check fluid level and condition first
2Inspect wiring for high resistance
3Test the solenoid command versus actual response
4Inspect the valve body if needed
❓ Frequently Asked Questions
Can I drive with P2762?
Only briefly. Erratic lockup causes shudder and heat that stress the transmission.
What does range performance mean?
The circuit responds but not within the expected range for the command.
How much to fix P2762?
Usually $300-$800 for a solenoid; wiring repairs may be less.
🔗 Related Codes
Don't guess. Know exactly what's wrong.AmpAuto's AI ranks the real causes for your specific vehicle in 30 seconds.
Diagnose P2762 Free →