P2761Transmission

Torque Converter Clutch Pressure Control Solenoid Control Circuit / Open

P2761 means the torque converter clutch pressure control solenoid control circuit is open, so the solenoid cannot be commanded and lockup does not engage properly.

🚗 Not recommended for long. An open lockup solenoid circuit disables converter lockup.

HIGH

severity

🎯 Top Causes, Ranked by Likelihood

#1Open wiring in the control circuit$100-$350

40%

A break in the wiring opens the circuit.

#2Failed TCC solenoid$150-$500

30%

An internally open solenoid triggers the code.

#3Corroded connector$80-$250

20%

Corrosion opens the circuit.

#4TCM driver fault$500-$1200

10%

The module output has failed open.

🩺 Common Symptoms

No torque converter lockup
Poor fuel economy
Check engine light
Higher rpm at cruise
Possible limp mode

💰 Repair Cost: DIY vs Shop

DIY Cost

$100-$600

Shop Cost

$300-$1500

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose P2761

1Check fluid level and condition first

2Inspect the control circuit wiring and connector

3Test the solenoid for continuity

4Verify the module command and circuit integrity

❓ Frequently Asked Questions

Can I drive with P2761?

Only briefly. Without lockup you lose fuel economy and generate extra heat.

What does circuit open mean?

There is a break in the wiring or solenoid so the circuit cannot complete.

How much to fix P2761?

Wiring repairs may be under $300; a solenoid runs $300-$800.

🔗 Related Codes

P2762P2763P2764P0740