P2712Transmission
Hydraulic Power Unit Leakage
P2712 means the transmission control module detected leakage in the hydraulic power unit, reducing the pressure available to apply clutches and bands.
🚗 Not recommended for long. Hydraulic leakage reduces pressure and can cause slipping and damage.
Is P2712 really the problem on YOUR car?Get a free AI diagnosis ranked by probability for your exact year, make, and model.
Run Free Diagnosis →
🎯 Top Causes, Ranked by Likelihood
#1Internal valve body leakage$500-$1500
Worn bores or seals leak hydraulic pressure.
#2Failing pump or seals$800-$2500
A worn pump cannot maintain pressure.
#3Low or degraded fluid$100-$300
Poor fluid reduces effective pressure.
#4Stuck pressure control solenoid$150-$500
A leaking solenoid bleeds off pressure.
🩺 Common Symptoms
- Slipping transmission
- Harsh or delayed shifts
- Check engine light
- Possible limp mode
- Overheating
💰 Repair Cost: DIY vs Shop
📋 Free OBD2 Code Cheat Sheet
The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.
🔧 How to Diagnose P2712
1Check fluid level and condition first
2Perform a line pressure test
3Scan for related pressure and slip codes
4Inspect and service the valve body and pump
❓ Frequently Asked Questions
Can I drive with P2712?
Only briefly. Hydraulic leakage causes slipping and can quickly damage the transmission.
What is the hydraulic power unit?
It is the pump and valve body assembly that generates and directs transmission fluid pressure.
How much to fix P2712?
Valve body service runs several hundred to over a thousand dollars; pump work costs more.
🔗 Related Codes
Don't guess. Know exactly what's wrong.AmpAuto's AI ranks the real causes for your specific vehicle in 30 seconds.
Diagnose P2712 Free →