P2614Engine
Camshaft Position Signal Output Circuit / Open
P2614 means the camshaft position signal output circuit from the control module is open or faulty, so the cam signal is not being passed on correctly.
🚗 Often drivable but get it checked. This output feeds camshaft timing information to other modules and faults can affect timing-dependent systems.
Is P2614 really the problem on YOUR car?Get a free AI diagnosis ranked by probability for your exact year, make, and model.
Run Free Diagnosis →
🎯 Top Causes, Ranked by Likelihood
#1Open or damaged output wiring$100-$350
A break in the signal output wiring causes the fault.
#2Corroded connectors$80-$250
Corrosion interrupts the signal output.
#3Faulty camshaft position sensor$100-$350
A bad sensor upstream corrupts the output.
#4ECM output fault$500-$1200
The module output driver has failed.
🩺 Common Symptoms
- Check engine light
- Rough running in some cases
- Timing-related driveability issues
- Related cam or crank codes
💰 Repair Cost: DIY vs Shop
📋 Free OBD2 Code Cheat Sheet
The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.
🔧 How to Diagnose P2614
1Inspect the output circuit wiring and connectors
2Test the camshaft position sensor
3Check signal continuity from the module
4Verify the output with a scope or scan tool
❓ Frequently Asked Questions
Can I drive with P2614?
Often yes, but timing-dependent systems may misbehave, so get it diagnosed soon.
What is the cam signal output?
It is the camshaft position information the module passes to other systems that need engine timing data.
How much to fix P2614?
Wiring repairs are often under $300; sensor or module issues cost more.
🔗 Related Codes
Don't guess. Know exactly what's wrong.AmpAuto's AI ranks the real causes for your specific vehicle in 30 seconds.
Diagnose P2614 Free →