P1362Ignition System

TDC Sensor No Signal (Honda/Acura)

P1362 is a Honda/Acura code meaning no signal was received from the Top Dead Center (TDC) sensor. Without this reference, the PCM cannot properly time ignition and fuel.

🚗 Often no. A missing TDC signal can prevent the engine from starting or running.

HIGH

severity

🎯 Top Causes, Ranked by Likelihood

#1Failed TDC sensor$60-$300

45%

A dead sensor produces no signal.

#2Open or shorted wiring$80-$400

30%

A broken circuit prevents the signal from reaching the PCM.

#3Distributor or connector failure$80-$500

25%

A failed distributor assembly or connector kills the signal.

🩺 Common Symptoms

Engine will not start or stalls
Check engine light
Hard starting
No spark or fuel timing

💰 Repair Cost: DIY vs Shop

DIY Cost

$60-$400

Shop Cost

$150-$600

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose P1362

1Check the TDC sensor connector and wiring for opens

2Test the TDC sensor for output

3Inspect the distributor assembly

4Replace the TDC sensor or distributor as needed

❓ Frequently Asked Questions

Can I drive with P1362?

Often not. A missing TDC signal can prevent the engine from starting or keep it from running.

Is P1362 a Honda code?

Yes, P1362 is a Honda/Acura TDC sensor no-signal code.

What causes P1362?

A failed TDC sensor, open or shorted wiring, or a distributor failure are the common causes.

🔗 Related Codes

P1361P1381P0335