B0092Airbag/SRS

Side Impact Sensor Fault

B0092 indicates a fault with a side impact (satellite) crash sensor. The SRS module cannot verify a valid signal from the sensor mounted in a door or pillar.

🚗 Yes, but side airbags may not deploy correctly, so address it promptly.

HIGH

severity

🎯 Top Causes, Ranked by Likelihood

#1Faulty side impact sensor$100-$400

40%

The satellite sensor fails or loses calibration.

#2Loose or corroded sensor connector$0-$150

35%

Door or pillar connectors corrode and drop the signal.

#3Wiring damage to the sensor$100-$400

15%

Door harness flex breaks the sensor circuit.

🩺 Common Symptoms

Airbag/SRS warning light on
Side airbags may not deploy properly
Fault after a minor door impact
Stored side sensor code

💰 Repair Cost: DIY vs Shop

DIY Cost

$50-$300

Shop Cost

$150-$500

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose B0092

1Disarm the SRS system per the service manual

2Inspect the sensor connector for corrosion

3Check the door harness for broken wires

4Replace the side impact sensor if the connector and wiring are good

❓ Frequently Asked Questions

Where is the side impact sensor for B0092?

It is usually mounted inside a front door or at the B-pillar.

Can I drive with B0092?

Yes, but side airbag deployment may be affected, so fix it promptly.

What causes B0092?

A failed satellite sensor or a corroded door connector are the common causes.

🔗 Related Codes

B0100B0092B0028U0151