U0428Network Communication

Invalid Data Received From Steering Angle Sensor Module

U0428 means a module received invalid or implausible data from the steering angle sensor module over the CAN bus. It can stem from a sensor fault, a calibration issue, or a wiring problem.

🚗 Not recommended. Invalid steering angle data disables stability control and can affect steering assist.

HIGH

severity

🎯 Top Causes, Ranked by Likelihood

#1Steering angle sensor fault or miscalibration$100-$600

45%

A failing or uncalibrated sensor produces invalid data.

#2Wiring or connector fault$50-$500

30%

Bus wiring problems corrupt the data being sent.

#3Software or module fault$100-$900

15%

Outdated software or a failing module sends bad data.

🩺 Common Symptoms

Stability control warning
Steering warning message
ABS warning light
Other U-codes and C-codes stored
Warning lights

💰 Repair Cost: DIY vs Shop

DIY Cost

$50-$400

Shop Cost

$150-$900

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose U0428

1Scan for stored steering and stability codes first

2Perform a steering angle sensor calibration

3Inspect CAN wiring and connectors for faults

4Verify the sensor reads correctly through a full steering sweep

❓ Frequently Asked Questions

Can I drive with U0428?

Not safely. Stability control is disabled and steering assist may be affected. Diagnose it first.

What causes U0428?

A failing or uncalibrated steering angle sensor, or wiring issues on the bus.

Does U0428 need a calibration?

Often yes. The steering angle sensor usually needs recalibration after repairs to clear this code.

🔗 Related Codes

U0126U0416U0131U0100