P2706Transmission
Shift Solenoid F
P2706 means the transmission control module detected a general fault with shift solenoid F, affecting gear engagement.
🚗 Not recommended for long. A faulty shift solenoid can cause harsh shifts, wrong gears, or limp mode.
Is P2706 really the problem on YOUR car?Get a free AI diagnosis ranked by probability for your exact year, make, and model.
Run Free Diagnosis →
🎯 Top Causes, Ranked by Likelihood
#1Failed shift solenoid F$150-$500
The solenoid sticks or fails electrically.
#2Wiring or connector fault$100-$350
Open, shorted, or corroded wiring disrupts the circuit.
#3Low or degraded fluid$100-$300
Poor fluid impairs solenoid operation.
#4Valve body wear$500-$1500
A worn valve body causes solenoid faults.
🩺 Common Symptoms
- Harsh or erratic shifts
- Wrong gear engagement
- Check engine light
- Possible limp mode
- Slipping
💰 Repair Cost: DIY vs Shop
📋 Free OBD2 Code Cheat Sheet
The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.
🔧 How to Diagnose P2706
1Check transmission fluid level and condition first
2Scan for related shift solenoid codes
3Test solenoid F resistance and wiring
4Service the solenoid pack or valve body as needed
❓ Frequently Asked Questions
Can I drive with P2706?
Only briefly. Shift solenoid faults can cause wrong gears and internal damage.
What does shift solenoid F do?
It controls fluid flow to engage a specific gear or shift path in the transmission.
How much to fix P2706?
A solenoid replacement usually runs $300-$800; valve body work costs more.
🔗 Related Codes
Don't guess. Know exactly what's wrong.AmpAuto's AI ranks the real causes for your specific vehicle in 30 seconds.
Diagnose P2706 Free →