P2242Fuel & Air Metering

O2 Sensor Positive Current Control Circuit High Bank 2 Sensor 1

P2242 means the positive current control circuit of the air-fuel ratio sensor on Bank 2 Sensor 1 is reading too high. Usually an open, a short to voltage, or a failed sensor.

🚗 Yes, short-term, but expect an emissions test failure.

MEDIUM

severity

🎯 Top Causes, Ranked by Likelihood

#1Failed air-fuel ratio sensor$80-$350

45%

The pump cell circuit fails high.

#2Open or short to voltage$50-$300

30%

Wiring fault drives the circuit high.

#3Connector corrosion$50-$200

15%

Poor contact affects the circuit.

#4ECM fault$300-$1000

10%

Rarely, the module driver fails.

🩺 Common Symptoms

Check engine light
Failed emissions test
Rough running
Poor fuel economy

💰 Repair Cost: DIY vs Shop

DIY Cost

$80-$350

Shop Cost

$200-$500

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose P2242

1Inspect wiring for opens or shorts to power

2Check the connector for corrosion

3Test the current control circuit

4Replace the air-fuel ratio sensor if confirmed

❓ Frequently Asked Questions

Can I drive with P2242?

Short-term yes, but repair it to restore fuel control.

How much to fix P2242?

Usually $200-$500 at a shop.

What causes P2242 most often?

A failed air-fuel sensor or an open in the wiring.

🔗 Related Codes

P2240P2241P2254P2239P0152