P0810Transmission

Clutch Position Control Error

P0810 means the clutch position control detected an error. On automated or dual-clutch transmissions, this affects clutch engagement. It can be a sensor, actuator, or adjustment fault.

🚗 Often drivable, but shifting or clutch behavior may be affected, especially on automated manuals. Have it checked soon.

MEDIUM

severity

🎯 Top Causes, Ranked by Likelihood

#1Clutch position sensor or actuator fault$80-$600

40%

The sensor or actuator cannot control clutch position correctly.

#2Wiring or connector fault$40-$300

25%

Damaged wiring in the clutch control circuit.

#3Clutch wear or adjustment$150-$1500

20%

A worn clutch changes engagement points.

#4Control module fault$200-$1000

15%

The clutch control module misreads position.

🩺 Common Symptoms

Jerky or slipping clutch engagement
Check engine light
Shifting problems
Limp mode on automated manuals

💰 Repair Cost: DIY vs Shop

DIY Cost

$40-$600

Shop Cost

$150-$1500

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose P0810

1Inspect the clutch position sensor and actuator wiring

2Check for related codes

3Test the sensor and actuator

4Perform a clutch adaptation if the system supports it

❓ Frequently Asked Questions

Can I drive with P0810?

Often yes, but clutch engagement may be affected. Have it checked soon.

How much to fix P0810?

Ranges widely from a sensor fix to clutch service, $150-$1500 or more.

Is P0810 serious?

Medium severity, but on automated manuals it can worsen and strand you.

🔗 Related Codes

P0805P0806P0900P0901