P0704 means clutch switch input circuit. The ECM saw a value or response outside its calibrated window for the transmission system. Real-world fixes usually start with the highest-probability cause below for your year, make, and model - not a parts-cannon guess.
Should you drive?
Severity HUD
MEDIUMSEVERITY
Is P0704 the real problem on YOUR car?Free AI ranking by year, make, and model - 30 seconds.
Electrical range or stuck solenoid produces harsh/delayed shifts.
#2Fluid level, condition, or filter$80-$350
0%
Burnt fluid or low level drops line pressure and trips sensors.
#3Wiring/TCM power or ground$50-$400
0%
Low TCM voltage or open circuits fake sensor faults.
#4Internal clutch pack or valve body wear$1200-$4500
0%
Mechanical slip exceeds adaptive control limits.
Symptoms Radar
Check engine light on (or flashing if misfire-related)
Possible rough running or fuel economy drop
Failed emissions readiness or inspection risk
Harsh, delayed, or slipping shifts
Related codes stored with freeze-frame data
Repair Cost
DIY
$40-$280
Shop
$150-$750
Diagnose It
1Confirm P0704 is current (not history-only) and save freeze-frame RPM, load, and fuel trim.
2Inspect connectors and harness for the listed sensor/actuator before replacing parts.
3Command the actuator or graph the sensor live with a scan tool; compare to known-good values.
4Fix the root cause, clear codes, and verify monitors complete on a mixed drive cycle.
FAQ
Can I drive with a P0704 code?
Usually drivable short-term, but fix soon to avoid catalyst damage or a roadside no-start.
How much does it cost to fix P0704?
DIY parts typically land around $40-$280. A shop diagnosis plus repair commonly runs $150-$750, depending on whether it is a sensor, harness, or major component.
What is the most common cause of P0704?
Shift or pressure control solenoid is the most common starting point (~38%), followed by fluid level, condition, or filter.