P0064 means ho2s heater control circuit high bank 2 sensor 3. The ECM saw a value or response outside its calibrated window for the emission control system. Real-world fixes usually start with the highest-probability cause below for your year, make, and model - not a parts-cannon guess.
Should you drive?
Severity HUD
LOWSEVERITY
Is P0064 the real problem on YOUR car?Free AI ranking by year, make, and model - 30 seconds.
Sensor response or heater current is outside the ECM window.
#2Exhaust leak before the sensor$100-$500
24%
False air skews readings and trips efficiency or response codes.
#3Wiring/heater fuse or relay$20-$150
22%
Open heater supply or ground kills warm-up and readiness.
#4Catalytic efficiency or EVAP component$150-$1800
18%
Downstream monitors fail when the cat or EVAP path is compromised.
Symptoms Radar
Check engine light on (or flashing if misfire-related)
Possible rough running or fuel economy drop
Failed emissions readiness or inspection risk
Intermittent stumble under load
Related codes stored with freeze-frame data
Repair Cost
DIY
$20-$180
Shop
$80-$350
Diagnose It
1Confirm P0064 is current (not history-only) and save freeze-frame RPM, load, and fuel trim.
2Inspect connectors and harness for the listed sensor/actuator before replacing parts.
3Command the actuator or graph the sensor live with a scan tool; compare to known-good values.
4Fix the root cause, clear codes, and verify monitors complete on a mixed drive cycle.
FAQ
Can I drive with a P0064 code?
Generally safe to drive; schedule diagnosis before the next emissions test.
How much does it cost to fix P0064?
DIY parts typically land around $20-$180. A shop diagnosis plus repair commonly runs $80-$350, depending on whether it is a sensor, harness, or major component.
What is the most common cause of P0064?
Failed O2/HO2S or heater circuit is the most common starting point (~36%), followed by exhaust leak before the sensor.