C1235ABS / Traction

Left Rear Wheel Speed Sensor Signal Fault

C1235 indicates the left rear wheel speed sensor signal is missing or faulty, common on Toyota and Honda systems. Without a valid signal the ABS module disables ABS and traction control.

🚗 Yes, but ABS and traction control may be disabled, so fix it soon.

MEDIUM

severity

🎯 Top Causes, Ranked by Likelihood

#1Failed wheel speed sensor$60-$250

40%

The left rear wheel speed sensor has failed.

#2Wiring or connector damage$50-$300

30%

Harness damage or corrosion near the rear wheel.

#3Damaged tone/reluctor ring$100-$400

20%

Damaged ring produces a poor or missing signal.

#4Excessive air gap or debris$0-$100

10%

Debris or a loose sensor corrupts the reading.

🩺 Common Symptoms

ABS warning light on
Traction and stability control lights on
ABS may not activate in a hard stop
Sensor drops out in live data

💰 Repair Cost: DIY vs Shop

DIY Cost

$60-$300

Shop Cost

$150-$450

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose C1235

1Scan and confirm the left rear sensor

2Inspect the sensor, connector, and tone ring

3Check wiring continuity and sensor air gap

4Compare live wheel speed data across all wheels

❓ Frequently Asked Questions

Can I drive with C1235?

Yes, normal braking works, but ABS and traction control may be off. Drive carefully and fix it soon.

How much to fix C1235?

A wheel speed sensor is typically $150-$450 installed, or less if you DIY.

What causes C1235 most often?

A failed left rear wheel speed sensor or damaged wiring near the wheel.

🔗 Related Codes

C1233C1234C1236C0045