C0065ABS

Right Front ABS Solenoid Valve Circuit

C0065 indicates a fault in the right front ABS solenoid valve circuit inside the hydraulic control unit. The ABS module cannot control brake pressure to that wheel, so it disables ABS.

🚗 Yes, but ABS and stability control are disabled and braking may feel different, so fix it promptly.

HIGH

severity

🎯 Top Causes, Ranked by Likelihood

#1Failed ABS solenoid valve$400-$1000

40%

A stuck or shorted valve inside the ABS module (HCU).

#2Wiring or connector fault$50-$300

30%

Damaged wiring or corroded connector at the ABS module.

#3ABS module (EBCM) failure$400-$1200

20%

Internal driver circuit in the control module has failed.

#4Low system voltage$100-$300

10%

Weak battery or charging fault triggers valve faults.

🩺 Common Symptoms

ABS warning light on
Stability control light on
Brake pedal may feel different
ABS not working in a hard stop

💰 Repair Cost: DIY vs Shop

DIY Cost

$100-$1000

Shop Cost

$300-$1200

📋 Free OBD2 Code Cheat Sheet

The 50 most common codes with likely cause and DIY fix cost. Sent once, no spam.

🔧 How to Diagnose C0065

1Scan and record all ABS codes together

2Check battery and system voltage first

3Inspect the ABS module connector and wiring

4Test the solenoid circuit with a scan tool that commands ABS output

❓ Frequently Asked Questions

Can I drive with C0065?

You can brake normally, but ABS and stability control are off. Braking may feel slightly different, so drive carefully and fix it soon.

How much to fix C0065?

If the valve or ABS module needs replacement, expect $300-$1200. Wiring repairs are much cheaper.

What causes C0065 most often?

A failed solenoid valve inside the ABS hydraulic unit or a wiring fault at the module.

🔗 Related Codes

C0061C0070C0110C0121